Your cart is empty.
Your cart is empty.Product Description
Safety and Tidy
No need to solder. No longer let the cables cross each other, only one connector is needed to connect safely and effectively and easy to replace the cables
Reassuring Material
The shell material is made of flame-retardant PC,the inside is nylon PA66 and copper tin-plated, which is fast conductive and can be safely insulated. Firmly connected without falling, durable
Quick Install
The operation is simple,the cable can be quickly connected in a few steps and reusable,saving a lot of time
Strong Practicality
It is suitable for various types of flexible and hard wires and used by various household appliances. It is a reliable compact connector
Why choose this connector:
We have a lot of household equipment in our home, so too many cables look very messy. This connector can not only help us rationally plan the cables, but also effectively solve the safety problems caused by the aging of the cable connection. Improper cable connection can cause short circuits,it can even cause a fire, etc..In order to avoid such dangerous things from happening, this connector can complete all wire connection projects more safely
Fuad Maayeh
Reviewed in the United States on September 13, 2024
O have tried many products in the market, this one actually keeps the wires in contact never loose wires once its on.
Fuad Maayeh
Reviewed in the United States on September 13, 2024
O have tried many products in the market, this one actually keeps the wires in contact never loose wires once its on.
Dean Stoneburner
Reviewed in the United States on August 10, 2024
Secure connections it appears. I use these for 12V and 24V DC Distribution in Ammo Box Stereo Builds that require both voltages. Makes things so much easier...
Dean Stoneburner
Reviewed in the United States on August 10, 2024
Secure connections it appears. I use these for 12V and 24V DC Distribution in Ammo Box Stereo Builds that require both voltages. Makes things so much easier...
Dr Jim
Reviewed in the United States on March 20, 2024
Handy, practical device for wiring my complex model railroad. Kept wires neat and secure with easy disconnect/reconnect making testing easy!
Dr Jim
Reviewed in the United States on March 20, 2024
Handy, practical device for wiring my complex model railroad. Kept wires neat and secure with easy disconnect/reconnect making testing easy!
JAMES
Reviewed in Canada on December 1, 2024
Good quality
JAMES
Reviewed in Canada on December 1, 2024
Good quality
JM
Reviewed in Canada on November 21, 2024
No need to buy the brand name ones, these are great and work really well. Easy to use and not a bad price at all.
JM
Reviewed in Canada on November 21, 2024
No need to buy the brand name ones, these are great and work really well. Easy to use and not a bad price at all.
mike122976
Reviewed in Canada on October 9, 2024
First order came and the case was broken with about 10 or 12 peices missing.2nd time it came it was perfect, new condition with all pcs ..great!
mike122976
Reviewed in Canada on October 9, 2024
First order came and the case was broken with about 10 or 12 peices missing.2nd time it came it was perfect, new condition with all pcs ..great!
Jordan
Reviewed in the United States on September 19, 2023
So far I've rewired outlets, ceiling lights, and an outdoor dusk-to-dawn light with these. I personally hate screw on wire connectors and these seemed like a good place to start. The switch can be a little difficult to open, but the tension on the connected wires fills you with confidence it won't let go. I'll buy more when I run out. I have a lot more wiring projects around the house to do.
Jordan
Reviewed in the United States on September 19, 2023
So far I've rewired outlets, ceiling lights, and an outdoor dusk-to-dawn light with these. I personally hate screw on wire connectors and these seemed like a good place to start. The switch can be a little difficult to open, but the tension on the connected wires fills you with confidence it won't let go. I'll buy more when I run out. I have a lot more wiring projects around the house to do.
William Iles
Reviewed in the United States on August 15, 2023
Very good quality for the price and compared to the name brand ones, they're just as good in my opinion.
William Iles
Reviewed in the United States on August 15, 2023
Very good quality for the price and compared to the name brand ones, they're just as good in my opinion.
Gary B.
Reviewed in Canada on November 9, 2023
Have used traditional Merret "twist on" connectors all my life. Decided to try these. They are well made and very durable. Once the wire is "locked in" it is almost impossible to pull out without releasing the switch. They come with a guide on the back to show how long to strip the wire. Great for all types of wire - solid, twisted pair, frayed. Like that you receive many different size combinations in the one box. Satisfied with my purchase.
Gary B.
Reviewed in Canada on November 9, 2023
Have used traditional Merret "twist on" connectors all my life. Decided to try these. They are well made and very durable. Once the wire is "locked in" it is almost impossible to pull out without releasing the switch. They come with a guide on the back to show how long to strip the wire. Great for all types of wire - solid, twisted pair, frayed. Like that you receive many different size combinations in the one box. Satisfied with my purchase.
Drew
Reviewed in the United States on July 7, 2022
These connectors work great and hold wires firm.. I didn't realize you have to forcefully pull the lever 45 degrees in order for it to open which to me, takes an extreme amount of force. At first I thought they were faulty because they were not holding the wires. I wasn't opening it to allow it to accept the wires. Try wiring an entire house pulling those bars up.. it hurts.These are larger than wago connectors by a little so if you don't have much room, something to consider.
Drew
Reviewed in the United States on July 7, 2022
These connectors work great and hold wires firm.. I didn't realize you have to forcefully pull the lever 45 degrees in order for it to open which to me, takes an extreme amount of force. At first I thought they were faulty because they were not holding the wires. I wasn't opening it to allow it to accept the wires. Try wiring an entire house pulling those bars up.. it hurts.These are larger than wago connectors by a little so if you don't have much room, something to consider.
Larry D. Frost
Reviewed in the United States on December 1, 2022
I had a place that I just couldn't get a regular wire twist tie to stay connected. these made the connection quick and easy. In another application, I replaced a controler in a touch lamp, and the color codes on the old and new units were different, even though they used the same colors. Correcting the circuit was quick and easy. simply detach two wires and reconnect. No fighting with several wires having to be straightened, realigned and retwisted in limited space. I will buy these again...if I ever run out...
Larry D. Frost
Reviewed in the United States on December 1, 2022
I had a place that I just couldn't get a regular wire twist tie to stay connected. these made the connection quick and easy. In another application, I replaced a controler in a touch lamp, and the color codes on the old and new units were different, even though they used the same colors. Correcting the circuit was quick and easy. simply detach two wires and reconnect. No fighting with several wires having to be straightened, realigned and retwisted in limited space. I will buy these again...if I ever run out...
Don Sutherland
Reviewed in Canada on November 4, 2022
I was a bit leery about these connectors since they are not CSA or UL approved and they cost one quarter of what Wago connectors do (which are made in Germany and are approved). However, I have used the Delgada connectors for two jobs and they seem to be far superior to the twist-on connectors I have been using for decades. I used a spring scale to measure the force required to pull a wire out of the connector and it took 25 lbs. Since the wire can rotate freely when it is connected, it makes it very easy to arrange the wires neatly in a box. The connectors are especially good for connecting stranded to solid wires, where you can never be sure that a twist-on connector is making a secure connection. Obviously no electrician would use unapproved connectors, but for the home handyman, the Delgada connectors are a huge improvement over traditional connectors. However, you should aware that a wire can be easily removed from the connector if it is twisted while being pulled. If a wire is pulled without being twisted, it takes over 25 lbs. of force pull it out of the connector. However, the wire comes out with little force if the wire is rotated while it is pulled. This could be an issue when the wires joined by a connector are stuffed into a switch or junction box. You should verify that all wires in a connector are still fully inserted into the connector after they are positioned in the box. Note that Wago connectors, which cost 4 times more have exactly the same problem.
Don Sutherland
Reviewed in Canada on November 4, 2022
I was a bit leery about these connectors since they are not CSA or UL approved and they cost one quarter of what Wago connectors do (which are made in Germany and are approved). However, I have used the Delgada connectors for two jobs and they seem to be far superior to the twist-on connectors I have been using for decades. I used a spring scale to measure the force required to pull a wire out of the connector and it took 25 lbs. Since the wire can rotate freely when it is connected, it makes it very easy to arrange the wires neatly in a box. The connectors are especially good for connecting stranded to solid wires, where you can never be sure that a twist-on connector is making a secure connection. Obviously no electrician would use unapproved connectors, but for the home handyman, the Delgada connectors are a huge improvement over traditional connectors. However, you should aware that a wire can be easily removed from the connector if it is twisted while being pulled. If a wire is pulled without being twisted, it takes over 25 lbs. of force pull it out of the connector. However, the wire comes out with little force if the wire is rotated while it is pulled. This could be an issue when the wires joined by a connector are stuffed into a switch or junction box. You should verify that all wires in a connector are still fully inserted into the connector after they are positioned in the box. Note that Wago connectors, which cost 4 times more have exactly the same problem.
Grapevine Tom
Reviewed in the United States on October 15, 2022
I had my ceiling fan light back up in 2 minutes using these. Also, having the Irwin Vise-Grip Self-Adjusting Wire-strippers made it possible! Later on, I found out that the Wago Wire Connectors are even BETTER, as they are clear and allow you to see the wire is exactly where you want it. Even so, these type work great and holds the wires well.
Grapevine Tom
Reviewed in the United States on October 15, 2022
I had my ceiling fan light back up in 2 minutes using these. Also, having the Irwin Vise-Grip Self-Adjusting Wire-strippers made it possible! Later on, I found out that the Wago Wire Connectors are even BETTER, as they are clear and allow you to see the wire is exactly where you want it. Even so, these type work great and holds the wires well.
Recommended Products