Your cart is empty.
Your cart is empty.Product Description
PACKAGE INCLUDING :
- 4 Sets ( Four Kits ) of Dual Acting Joint Fasteners for Kitchen or Bathroom Counter-Tops and Furniture Tabletop ( Also Known as Countertop Joint Fasteners Double Action Improved Alternative of Miter Bolt Joint Connector Kit ).
- 1 Hex Wrench Key and 8 Screws for Each Set also Included.
MATERIAL OF CONSTRUCTION :
- Zinc Plated Steel
_________________________________
INSTALLATION INSTRUCTIONS ( Let's Make Instruction Simple Because It Is ) :
- Massage Part A and Part B on each side of the seam, align them and screw tight.
- Snug all the fasteners, but NOT over-tighten Part C to avoid breaking laminate surface side.
- Adjust height of Part D(s)to perfectly level the panels on each side of the seam.
- Tighten Part C to finalize an installation.
_________________________________
TIPS :
- You can fully adjust fasteners post installation.
- You can optionally use glue for the seams.
- Countertop paint can be used before or after installation.
- Works great as wood joint connector.
NOTES, we noticed a comment "Cannot reach the screws after installation" from a customer, here is the friendly reminder from seller:
- Simply use the included Hex Key, you should be able to fasten the Hex Socket Cap Screws very easily.
_________________________________
Tom
Reviewed in the United States on February 13, 2025
Used these to connect 2 butcher block countertops in our new kitchen. Finished look is great, worked exactly as needed. The only thing I would do different is install them to the last top before placing. Would make installing final screws easier inside a cabinet.
ATwallace
Reviewed in the United States on September 25, 2024
Made installing a three piece counter top way easier.
YTOKFISH
Reviewed in the United States on August 1, 2024
I’d never seen or tried this type of miter hardware before. NO ROUTING REQ. The adjustments up, down, sideways and along the cut WORKS AMAZINGLY well! I will use only these from now on. Only two minor issues: 1. No included installation instructions. (had to figure it out on my own.) 2. The sub-top underneath, had to be cut open to allow for the bulk of the hardware to pass through & the countertop to sit down flat. (careful with the lazy susan location ‘cause you don’t want to cut out where it attaches up top) This wasn't that big of a deal. I’m pretty happy with this product.
Customer
Reviewed in Canada on August 1, 2024
La construction n'est pas très précise,
C.V.
Reviewed in the United States on July 5, 2024
This is a good idea and worked great, half the time. The other half the bolt stripped out while tightening. Since the head of the bolt is round and snug against the counter top it wont tighten or loosen. My only option would be to remove it, put in another hoping to not strip out the screw holes in the wood, and then hope it didn't happen again.
Jody McClung
Reviewed in the United States on June 20, 2024
Used these while completing a total remodel including Ikea kitchen cabinets and countertops. I had to cut some of the countertops and join them together. I ran across these and the idea seemed logical and efficient. They worked great as I was able to make fine adjustments and achieve complete smoothness of the tops. Don't hesitate to give these a try. You won't be disappointed.
Don Fear
Reviewed in Canada on March 16, 2024
They work as they should. A little finicky for malamine countertops (they should have wider contact points for adjusting height) but they get the job done
Customer
Reviewed in the United States on October 1, 2024
We used these to connect and level a counter top we put in our small cabin. They look complicated but did the job perfectly! This was our first time doing anything like this and I’m very pleased with how it turned out.
Sehbius Tecumseh
Reviewed in Canada on August 8, 2023
I used it so my carpenter can secure the counter top really well
ken fondren
Reviewed in the United States on October 27, 2023
I dont know what the bad review leavers are experiencing. These worked flawlessly for me I did get different screws, only because I don't like the square head. Rather use Phillips head. But these installed with no problem. Screws didn't strip and it pulled the two pieces of WHiTE OAK butcher block together easily
Gerrad Friedline
Reviewed in the United States on January 23, 2023
I read plenty of reviews and had my reservations, but decided these couldn't hurt to try. I was debating on using biscuits and pocket screws or traditional clamping bolts on my butcher block install, as I was assembling them I tried these to see if they would do the job.Installation is relatively simple. I did have to add these to the underside after setting counters and it wasn't too bad. The clamping action was very sufficient at tightening up my gaps, and the adjustment features allowed for smooth, flush counter surfaces at the seams with no additional finishing. I added pocket screws to keep things right after using these to set level and close the gap.The screws included were sufficient, but as others have stated, if you have adequate material thickness, consider a slightly longer screw. I didn't rip any screws out, but I could see the screws being an issue if the joints were overtightened.The only downside I found was locating at joints with cabinetry adjacent. The hardware was interfering on one joint which would have required me to route a section of cabinetry to fit the hardware. Clamp bolts would have worked in that location.
Kelly
Reviewed in Canada on December 10, 2022
Works great easy to use. I thought it was a little pricey.
B6WAGON
Reviewed in Canada on January 8, 2021
Works as described. Used to join two 45* desk edges. I ordered these and the seller shipped from the states. Shipping took longer than usual, but no additional fees were added to the order. Seller was quick to answer the questions on the ad.There are no canadian retailers that sell these type of mounting brackets - definitely recommend.
Recommended Products