COMP.ENG/MOR Competition Engineering C2730 Rear Drag Race Shock

5.0 Write Review

Free shipping on orders over $29.99

$76.54

$ 36 .99 $36.99

In Stock

Qty.:

About this item

Fits; Dodge Challenger 1970-’74, Dodge Charger/Coronet 1965-’72, Dodge Lancer 1961-’78, Dodge Magnum XE 1977-’79, Dodge Monaco 1962-’78, Chrysler Cordoba 1975-’76, Plymouth Barracuda 1970-’74, Plymouth Belvedere/Fury/Savoy 1962-‘70, Plymouth Satellite 1965-’74, Plymouth GTX 1967-’70, Plymouth Road Runner 1968-‘75
Competition Engineering’s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile.
The principle behind our shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
Competition Engineering’s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It’s as simple as twist and click.
Our Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.

Shock,Rear,Drag Race for Dodge/Chrysler Challenger 1970-1974, Charger/Coronet 1965-1972, Cordoba 1975-1976, Full Size 1957-1964, Full Size 1974-1978, Lancer/Monaco 1961-1978, Magnum XE 1977-1979, Plymouth Barracuda 1964-1974, Belvedere/Fury/Savoy 1962-1970, Belvedere/Satellite 1965-1974, GTX/Road Runner 1967-1970, Road Runner 1971-1975

Recommended Products

84176631 Front Air Shock Strut Absorber with Spring Magnetic Assembly – Compatible with 2015-2021 Cadillac Escalade, Chevy Suburban, Tahoe, GMC Yukon XL, Sierra 1500 – Replaces OEM #580-1108(2PCS)

$245.89

$ 99 .00 $99.00

4.6

4pcs 20 x 15mm Rubber Mounts Rubber Vibration Isolator Mounts Shock Absorber with M6 x 19mm Studs Vibration Isolators

$7.99

$ 3 .99 $3.99

4.9

4 Pcs Rubber Studs Shock Absorber Anit-Vibration Isolator Mounts for Mini Split Heat/Water Pumps, Air Compressors, Diesel Engines, Harvester, Generator, Gasoline Engines- Grey(AG-35)

$9.99

$ 4 .99 $4.99

4.4

8Pack M8 Rubber Studs Shock Absorber Anti Vibration Isolator Mounts, M8-20mm Rubber Cylindrical Vibration Isolation Mount with 2 Threaded Studs, for Air Compressors, Pump, Garage Motor, Diesel Engines

$17.49

$ 7 .99 $7.99

4.6

E-outstanding Flight Controller Damping Board Shock Proof Absorber Plate Mount Set for Quadcopter Pixhawk APM2.5/2.6/KK/MWC

$8.59

$ 4 .99 $4.99

5.0

383EER3001S 383EER3001V Washer Shock Absorber Fit For LG Kenmore/Sears washers,For WM2501HWA,WM2301HR,WM2801HLA,WM8000HVA etc,Replaces 1578672,AP5201523,PS3522317,EAP3522317-3Pack

$30.36

$ 15 .99 $15.99

5.0

Steering Damper 539102720 (Pair), Compatible with Husqvarna BZ BZE EZ MZ RZ IZ ZTH Zero Turn, Poulan Pro, RedMax, Jonsered Lawn Mower & Tractor, Steering Gas Shock Dampener, Motion Control Damper

$22.89

$ 10 .99 $10.99

4.7

37289 2PCS Rear Suspension Shock Absorbers Struts, the Rear Shock Struts Compatible with Toyota RAV4 2006-2018#OE 37289

$45.99

$ 22 .99 $22.99

4.6

Shopping Cart

Your cart is empty.

COMP.ENG/MOR Competition Engineering C2730 Rear Drag Race Shock

About this item