Your cart is empty.
Your cart is empty.Product Description
About Taps
Straight flute design, made of 6542 high speed steel. It is used to process threads of various through holes or shallow blind holes. Can process copper, brass, A3 steel, aluminum, cast iron and other materials.
Generally used in conjunction with tapping machines, integrated bench drills, CNC lathes, machining centers, etc. Manual processing is also possible. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed.
Recommended feed rate:
Hard steel: 5-10m/min, cast iron: 8-10m/min, ordinary steel: 6-15m/min.
About Dies
Made of alloy tool steel, hardness and wear resistance. Used to repair external threads. When in use, the conical locking hole of the die is aligned with the screw of the wrench and tightened. The conical keyhole has a strong locking force and is not easy to loosen.
Suggest:
Appropriate lubricating oil should be added to the die-cutting edge when cutting, It is to be reversed every 1/4~1/2 turn to facilitate chip discharge from the chip hole.
JoPeM1
Reviewed in Germany on February 17, 2025
Macht einen qualitativ guten Eindruck! (Ich hab lange Zeit in der industriellen Fertigung von Verbindungsteilen gearbeitet daher kann ich die Qualität von Werkzeugen gut einschätzen).Habe damit ein Gewinde in rostfreien Stahl geschnitten! Richtige Handhabung ist natürlich Voraussetzung.Kernbohrung leicht vergrössert gebohrt und gut geschmiert, mit Gefühl per Hand geschnitten!
Brian Lassahn
Reviewed in the United States on August 3, 2024
For whatever reason, the bolts and inserts get galled up and you can cross thread these bolts when you are reinstalling them. If they are not going in finger tight, recommend cleaning both the bolts and insert with the tool. The few extra minutes will save you a ton of time and frustration.
Josef E.
Reviewed in Germany on August 25, 2024
Preis super, Passgenauigkeit mässig, für nicht zu harte Materialien gut geeignet.
Steve R.
Reviewed in the United States on December 16, 2024
Fit and performed perfectly
Donnie
Reviewed in the United States on December 16, 2024
I bought to rerun shallow threads but after ten minutes I gave up. Will be looking for a better product
Just a welder guy
Reviewed in the United States on October 7, 2024
Worked and didn't snap off in the hole!
Tom B.
Reviewed in the United States on October 31, 2024
Works well
Konrad S.
Reviewed in Germany on June 16, 2023
Das Gewindebohrerset hat die gestellten Erwartungen erfüllt und ist in Ordnung
JGH1035
Reviewed in the United States on November 27, 2023
Purchased product came quickly and as described
Customer
Reviewed in the United States on October 22, 2023
Both tap and die worked great
B. Williams
Reviewed in the United States on October 30, 2022
I wanted to replacing a cylinder head temperature sensor. It was not an easy task. I had to cut the wire to fit a socket for removal. Once the old sensor was removed I couldn't get the new sensor to screw in. For two days I tried every tool that I could find or make to get the new sensor to screw into the head, but it would not screw into the cylinder head. Then it occurred to me to clean the threads up. I tried every auto parts and hardware to find a tap/die M10-1.0. The only place that I could find that size was Amazon. It arrived four days later. 10 min. later I had cleaned the cylinder head sensor hole threads and screwed the new sensor in.
Recommended Products
$47.79
$ 20 .99 $20.99