Your cart is empty.
Your cart is empty.Product Description
This handlebar extender made of made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.
Package comes with three size rubber ring inserts to provide a snug fit and protection of the mounting surface. The rubber ring diameter: 0.875" (22mm), 1" (25.4mm), 1.125" (28.6mm). You can add or remove them depending on the size of the handlebars. The handlebar clamp base diameter is 1.26'' (32mm) when rubber ring insert is not included. Accommodates handlebars 0.875 inch (22mm) / 1 inch (25.4mm) / 1.125 inch (28.6mm) / 1.26 inch (32mm) in diameter. Set also comes with an Allen key for easy installation.
Melody Judd
Reviewed in the United States on February 9, 2025
Works as u would assume looks nice
JK
Reviewed in the United States on February 9, 2025
Installed on my motorcycle for cell phone holder and I love it it.
Bob Johnson
Reviewed in the United States on February 8, 2025
Used to mount a Shimano trigger shifter outside the usual handlebar location. What with aero bars & and all the controls associated with an E bike there was no place left for the trigger shift. Very solid, takes up minimal space.
David
Reviewed in the United States on February 19, 2025
It appears to be a quality item, however it looked odd sticking 4 inches high over my handlebars. Was going to mount two headlights on it. The headlights did mount perfectly and was a very solid installation. Didn't cost much to try, since I am not returning them. If you need to have this for an accessory then it is pretty solid. But I do not think it adds to the overall looks of my bicycle.
Customer
Reviewed in the United States on January 4, 2025
It is very light weight, strong and holds to handle bar securely. Has a nice finish get the job done well.
Customer
Reviewed in Germany on January 18, 2025
Erfüllt seinen Zweck einwandfrei. Leichte Montage, stabiler Halt, gute Qualität.
Andrea
Reviewed in Italy on June 13, 2024
Il supporto è molto comodo e la barra si può spostare a destra o sinistra del morsetto di aggancio, così da avere maggiore margine di regolazione. La qualità dei materiali è percepibile a tatto, sia per leggerezza che per robustezza. Tutte le parti sono verniciate accuratamente senza sbavature, fatta eccezione per le viti che rimangono del colore naturale e non nero come tutto il resto. All'interno sono presenti i vari adattatori in gomma da utilizzare per i diversi diametri di manubrio.
Huong
Reviewed in the United States on November 15, 2024
Sturdy, good for bike
ghraspalt
Reviewed in the United States on August 7, 2023
I was going to return the mirror because the mounting connector was too small in diameter for the handle bar on my bike. Mirror was good quality and this little add-on bar (which clutters my handle bar) enabled me to mount the mirror. It is not an ideal fix, but it is a fix. Cost was almost as much as the mirror--somehow that does not seem logical. I recommend if you have too much crap for your handle bars (like I do). My rating should be about 4.5 mainly because it solved my problem. I don't know how long-term sturdy this will be and light weight is subjective. Neither of these metrics are important; there should be an option for "does it solve your problem" that would be a 5 as far as I am concerned.
Daniel 42
Reviewed in France on July 22, 2023
Reçu rapidement, installé facilement, parfait pour ce que je voulais y mettre, une commande d'éclairage et clignotants. Je recommande ce vendeur et ce produit solide et facile à installer.
M. Costas
Reviewed in the United States on May 14, 2023
I was trying to figure out a way to rig something like this, I couldn't think of a phrase to search for and didn't know they were made, I stumbled upon a reference somewhere.I saw several models for various prices on Amazon, this one was not expensive and was smaller than some of the others. I only needed something big enough to do the job, anything larger would have been in the way.The main motivation was to raise my light above my cables. This is perfect, I also stuck my gps on there.I like the way the clamp that goes around the handlebars is hinged. I used a rubber spacer around that and around the clamp for my light. My GPS bracket just used zip ties so it didn't need anything.I had no problem with slippage, I have it pretty upright so it's unlikely the weight from my devices would have much effect.I mounted the bracket close to the stem as possible, and the bar that things are mounted is offset a little, the mounting bar is not centered in the clamp.This is because I only needed a little space for my GPS but wanted the light to be centered on the handlebars over the stem, hopefully this shows up in the pictures.It's not meant to be a handlebar, it's an extension for your attachments. It's very sturdy for that, big enough to do the job, not too big to get in the way. I may order another for my other bike.
Chris SInclair
Reviewed in Canada on November 2, 2023
I knew it was the end. I overclocked my controller on my ebike and hotwired the BMS on my ebike to give maximum power at a full 30 amps double what the controller could take. It would burn it out fast, but I didn't need it to last long. I lined up perpendicular to the cliff, thumb on the throttle ready to ride into sweet oblivion like Quadrephinia or Thelma and Louise. I couldn't live anymore knowing in my heart and soul that I couldn't mount the two questionable light products I bought. I just couldn't live with this bike light heresy. My thumb put pressure on on the throttle, I bent down in a speed racers position to give maximum velocity into obilivion when suddenly.....Bleeep Boooop. My incessant phone trigger off. "What would it matter if I checked one last message?" I pondered. I took, with shaking hands full of adrenaline, the phone and glared angrily at the screen. "Your Amazon package has been delivered". Could this be it? Could this be my salvation? Will finally I can escape the path of the "Unclean" bad bike mounting options? No, I dare not hope. It's too good to be true. But....I must know. I must keep the flame of proper double bike light mounting alive. Damn me...I flew home as fast as my hotwired controller and overclocked BMS would allow without a thermal runaway fire on the battery. Then I saw it....the friendly baby blue Amazon packaged at my door. Dare I hope? Dare I dream? No I dare not. I, with shaking hands, gently pried open the heat sealed package. "Could this be true? Could this be my salvation out of this bike light mounting heresy?" Then I opened it and a light like the Ark of the Covenant blinded my eyes and filled my spirit with new hope and I lifted my head back to the heavens "I am saved!!!!!"
Treinzz
Reviewed in Mexico on June 10, 2022
emde buen material y estetica ,no se mueve al estar colocado y aguanta bien el peso
Recommended Products
$37.79
$ 17 .99 $17.99