Your cart is empty.
Your cart is empty.Product Description
ALL-INCLUSIVE SET
We’ve included everything you need to go from unboxing to accurate readings in minutes.
Every Kit Includes:
- 2 x AAA Batteries
- 3 x 7.9” Reflective Strips
- 1 Non-Contact Tachometer
Taking contactless measurements is easy. Just stick the included reflective strips onto the spinning object, turn on the meter, aim the laser at the reflective tape, and obtain your readings.
DESIGNED FOR PRECISION
Accuracy is what sets apart the BAFX Products non-contact tachometer from all the rest.
Technical Information:
- Sampling Rate: 1x/Second
- Measuring Distance: 2” – 20”
- Power: 2 x 1.5V AAA Batteries
- Measurement Range: 2.5-99,999
- Resolution: 0.1 RPM up to 9,999 & 1.0 RPM up to 99,999 RPM;
- Accuracy: +/-0.1%+5d (digits) on speeds 2.6-999.9RPM OR +/-1%+5d (digits) 1000-99,999RPM
DISCOVER THE POWER
With a press of a button, the BAFX Products tachometer stores max, min, last & average readings from your most recent measuring session. It also makes it easy to review readings on the 5-digit digital display, has a backlight for reading clarity, a solid, rugged build for durability, and a low-battery indicator to help you always know when batteries are running out.
CRAFTED FOR PORTABILITY
We’ve created our RPM meter with compact functionality in mind. This means a tach meter that easily fits in your pocket or work apron – ready to go when you are. 2 x AAA batteries (included) conveniently power the tachometer, with an auto power-off feature kicking in after 1 minute to prolong every set of batteries. Disable the auto-off function whenever you wish.
MEASURING MADE EASY
We’ve kept things simple – because tinkering with that engine is work enough. So, unlike other digital tachometers that have a confusing array of buttons, ours tames all the functions with just 3. Whether you work in a carpentry shop, auto garage, or manufacturing plant, you can count on the BAFX Products non-contact tach to accurately get the job done the hassle-free way.
Mr Mac
Reviewed in the United States on March 27, 2024
Right now, I'm giving this unit a 5 but, since my DT-22234C+'s laser died with less than 50 usages, I may have to recall my review. For now, I used this Tach to test & set the RPMs on two B&S lawn tractor engines using a reflector on top the debris screen. The measurements were compared to a wired inductive tach connected to the spark plug wire. Both readings were tolerably the same. I could never get my other tach to come within 500 rpms during this same check. I like the on-off and AAA battery features (I totally dislike 9V batteries). So far, so good.
pipeweld60
Reviewed in the United States on March 1, 2024
use one time it showed 645 rpm about right
rusty
Reviewed in the United States on September 20, 2022
It still powered up but did not read anything after a month and a half. Used for small engine repairs. Not sure if it was accurate with no other method of reading rpm.
James
Reviewed in the United States on July 7, 2022
Got this to measure the spindle speed on my drill press because I though it was spinning too fast and to ensure I was setting the belt properly. Well, it turns out that it was NOT spinning too fast and the belt was set properly because it is reading within just a few RPM of what the drill press states it should be running at with the belt in that position. So, guess it works great!
Bob T.
Reviewed in the United States on August 15, 2021
Needed to check motorcycle engines rpm. This unit worked very well and was not hard to use.
Dan
Reviewed in the United States on July 6, 2021
Purchased this to adjust zero turn mower. You have to adjust the speed of each rear wheel which are driven by hydraulic motors. I taped the reflective strip to each rear wheel, jacked it up and started it up. Checking the speed of each rear wheel. It takes a minute for the tachometer to stabilize its readings. Was able to adjust them to within 1/2 rpm. Worked well. Will get two earth magnates to make reflective dots to use on other metal objects, those will work easier than using strips of reflective tape. Overall well satisfied with units.
ORGramps
Reviewed in the United States on December 2, 2021
Purchased this product to use on my direct drive lathe which has only a "1-9" speed setting dial. I can't be certain about the accuracy of the meter, but the read speeds do seem reasonable based on my experience turning wood. I took one reading at about 60 rpm and it checked out with my count of actual revs.It took a few tries to learn how to hold the meter.What I like: 1. off on switch with "hold down" to obtain reading; 2. Compactness; bright laser; several tape strips in case I make a mistake and need to re-tape.What I don't like (but have learned to work with): size/shape of the laser spot on tape . Would like it to be smaller-more sharply defined so user doesn't have to be so close to the rotating equipment.
Elijah D Eason
Reviewed in the United States on November 29, 2021
I rebuild alternators and starters, we were curious as to the speed the alternator was spinning. The product seems to be accurate, will have to test it on a few other products or one that displays a secondary speed.
Recommended Products
$28.99
$ 14 .99 $14.99