Shopping Cart

Your cart is empty.

Your cart is empty.

ATO Dynamic Torque Sensor with LCD Display, 100 Nm, 4-20mA Output Signal, Digital Rotary Torque Sensor

Free shipping on orders over $29.99

$938.99

$ 99 .00 $99.00

In Stock

About this item

  • ATO Digital rotary torque sensor with LCD display has the capacity of 100 Nm. LCD display can show torque, speed and power value at the same time.
  • Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm.
  • Rotary torque sensor with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output 4-20mA torque signal to PLC.
  • Application: It can be applied to torque/rotary speed/power measurement of AC/DC motor, gear motor and diesel generator for a long-term, can measure both forward and reverse torque.
  • ATO Torque sensors have other Capacity to choose from: 0.1 Nm, 0.3 Nm, 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, 10 Nm, 20 Nm, 300 Nm, 1000 Nm, 5000 Nm to ±10000 Nm.. * If you need other Capacity , Please feel free to contact us.



Product Description

ATO air quality monitor for home and office
Digital Rotary Torque Sensor
Output Signal

ATO torque sensor can directly output standard signal (±5V/0-10V/4-20mA/RS485) to PLC, DCS and other automation control systems.

If you need other Output Signal, please feel free to tell us.

ATO Digital Rotary Torque Sensor Features

  • Rated speed---10000rpm
  • Maximum speed---15000rpm
  • LCD display---can show torque, speed and power value at the same time
  • Electrical connection---7 pin waterproof circular connector
  • Elastic element material---17-4 stainless steel
  • Adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm
  • Can measure both forward and reverse torque
Wide range of capacity

It has capacity range from 0.1 Nm, 0.3 Nm, 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, 10 Nm, 20 Nm, 100 Nm, 300 Nm, 1000 Nm, 5000 Nm to ±10000 Nm.

If you need other capacity, please feel free to tell us.

ATO Rotary Torque Sensors Specification

Capacity range* 100 Nm(Default 100 Nm, please let us know if you need to buy other capacity)
Power supply DC 24V
Output torque* 4-20mA (Default 4-20mA, please let us know if you need to buy other Output torque)
Non-linearity 0.1%FS (Accuracy 0.001, Capacity=Lowest Nm)
Hysteresis and Repeatability 0.03%FS
Temperature drift on zero 0.01%FS/℃
Temperature effect on output 0.01%FS/℃
Consumption current <150mA
Load resistance ≥2kΩ
Output speed 60 pulse per revolution (OC output is standard configuration, and 5V TTL output is optional)
Response performance 1kHz
Signal delay 0.6ms
Ultimate overload 200%FS
Rated speed 10000rpm
Maximum speed 15000rpm
Maximum Deformation 0.149°/1Nm at 2.60*10rad (The maximum deformation angle generated by 1Nm at 2.6*10rad rotation arc is 0.149°)
Inertia moment 0.38kg·cm
Natural vibration frequency 19.4kHz
Torsion constant 3.85*10Nm/rad
Protection grade IP43