I purchased the 'dimmable daylight white 4500k 3-pack' version of this to add lighting inside my Prusa Mini+ 3d printer enclosure. It is great that the manufacturer included multiple mounting options for this product. In my case, I was able to use the magnetic option. The magnet mounts snap firmly to channels on the side of the metal light bars. And the magnets are strong enough to affix the lights to my steel enclosure.What I like about this product:Three mounting options. Magnets, double sided sticky tape, and wood screws.Metal heat sink/backing on the light strips - helps dissipate the heat that can cause LEDs to fade over time, and provides a very sturdy base for the mounting clips.Diffused light - the built in diffusers provide a soft light that many LED strips don't have.Plenty of cable length (for me at least). The power cable leading to the light strips is not very long, but the in-line remote cable adds to the that length. Mine also came with yet another extension cable. I was able to use this so the remote could be located outside my enclosure, and easily disconnected if I need to move it. Again, perfect for what I needed.The power adapter appears to have adequate standards certifications printed on it, and only pulls 12.3W at full power, which is only about half of the power supply's rated power (24W).What I don't like is the way they advertise that it 'works with smart plug' and show a picture of a phone with an app that appears to control the timing of the lights. I think this is misleading and could confuse some people into thinking this version has an app associated with it and can be controlled using a phone. To be clear, this is not a 'smart' device. There is no app, and the remote is wired in. Sure, you can control it with a smart plug, just as you can control anything else.

We replaced our old halogen puck lights under our kitchen cabinets with these. They were very easy to install - came with all kinds of helpful mounting gear - i.e. tape, screws, magnets. They are super slim, hide easily, completely flicker free, burn cool, energy efficient, and the lights look great - also dimmer included. The price is a steal for these - highly recommend. We also put them on a Wi-Fi timer plug - which these works great with. We got the soft white and they are just the right hue of light.

Perfect lighting for under a shelf on my computer desk. Came with a variety of fasteners for mounting just about anywhere. Works great!

I wanted some bright lights installed under by cabinets, on top of the garage work table. At first, I thought it wasn't as bright as my single 800 lumen LED strip (which was too big to fit in that space), hence I bought these 3 LED strips. However, I accepted the fact that I wouldn't be doing surgery or anything that needed the power of the sun illuminating my space overhead.I've been using these lights for a week now and they have done the job well. More than enough illumination for the space.Linking the individual lights were easy to do and they include a variety of plugs and controls and mounting options. While I wished they had longer wires for longer runs between lights, I made do with the lengths included. If I end up moving one of the lights further, I can always splice the wire and extend it as needed.Highly recommended!!

Love this product. It gives bright light, easy to install with long cords. You will need the adhesive clips to tie up the cords. I like that there is 3 ways to install the lights-magnetic, drill or adhesive sticky pads. I used the adhesive pads. No flickering and lights can be dimmed. Would recommend for under cabinet lighting for a small kitchen. If your kitchen is bigger go for the ones that offer 6 lights.

These lights were very easy to install. They provide great light and are invisible under the cabinets. They come with a dimmer but, I found the brightness perfect without using it. I ordered 2 more sets. The daylight spectrum provides a nice white light. I highly recommend these lights.

Great lighting, very well made, sturdy and easy to install and use.Wish there would be an option to buy only one remote.

These feel and look great. The end to end connectors are great. The light colour is accurate and they are tremendously bright. There’s like 6 or 7 clicks of brightness adjustment and anything above 2-3 clicks is overkill even for our dingy basement apartment.The mounting accessories are weird tho. The power supply is probably 4 feet long, and then the on/off switch is on its own cord another 3-4 feet long. So you have 7-8 feet of cord you have to hide somewhere even before you get to your lights. The light to light joining cords are a little long too, 7-8” as l remember, a little excessive for my application of just rounding a slight bend on a corner cupboard. The length of wire mentioned, not enough cable clips for it all. Last but not least the power supply seems to get pretty warm during operation to the point I turn them off at night and leave the range bulb on instead. I wanted them as a night ambient light but it just gets a little warm for my liking.But I’m too picky for my own good, these are a good product for the price. There are far worse products out there for more money. Would recommend honestly.

These under-cabinet lights really helped light up the counters all the way around my kitchen. My kitchen was previously lit just by a fluorescent fixture on the ceiling and was relatively dark, especially on the counters. I installed 4 of these 3-packs and the whole room feels much brighter now. The counters are now very well-lit. I would really probably rate these more like 4.5 stars, but that's not an option and I don't think the minor issues I had with them were worth knocking a whole star off.The customizability of these lights worked very well for my use case. My kitchen has cabinets in 4 different disjoint sections (one on an island, one on one side of the sink, one between sink and stove, then one on the other side of the stove.) Installing a hard-wired solution would have been a huge pain (and also quite expensive,) requiring running new power lines through the walls in several places. Being able to just plug these into the AC outlets along the wall under the cabinets saved tons of effort and likely at least hundreds in installation costs. Plus, if/when I or a new home owner wants to replace these, it's far easier to do this way than with a hard-wired solution.Being able to install these without the switch in-line and instead plug them into smart plugs worked out great. I had already installed a Kasa smart switch on the main light in my kitchen anyway, so I just got 4 Kasa smart plugs and set them to turn on and off with the main light, then plugged these four sets into them. This way, there's no need to run wires through the walls or behind the stove or anything like that. Each set is just plugged individually into an outlet with a smart plug and the whole room lights up when I turn on the main light.The customizability of this set is hard to beat. Each strip can be connected either with a short barrel adapter or with a cable. The cable worked great for turning corners or when the strips just needed to be a little farther apart and the barrels generally worked well for when the strips needed to be placed end-to-end. The only problem I had with this was one of the barrels apparently just wasn't making a good connection and was causing the strip downstream of it to occasionally flicker or run dim. Since I had unused barrel connectors, though, I just swapped that one out with another one and it's been working great since then. Being able to simply leave the switch out of the circuit is a great for my use case, since I want the lights to come on at full brightness whenever the smart switch turns on anyway.Installation was relatively straightforward. Just make sure to peel the plastic cover off of the metal strips, attached the adhesive strips to them, then place the adhesive strips underneath the counter where you want the supports to attach. Once the metal plates are installed in position underneath the cabinet, then you just snap the supports onto the light strips and then they hold magnetically to the metal plates. I've had these up for several months now and no issues at all with the lights detaching from the metal plates or the adhesive that holds the plates to the cabinets letting go. Do make sure to remove the plastic backings, though, as they won't hold up with those on.I have had a few relatively minor issues with these as mentioned at the beginning, though:- One of the barrel connectors was apparently defective. No problems after replacing it with a spare one, though.- The adhesive on the clips designed to hold the wires up against the under side of the cabinet is rather poor. These all fell off very quickly. I replaced them all with Command strip hooks and that solved that problem. This only applies to the clips designed to hold the wires up, though. The adhesive that holds up the lights themselves works great.- There's about a 1-second delay between when the lights get power and when they actually light up. This is really just a slight annoyance, but it does create a noticeable delay between when the smart plugs turn on and when the lights actually light up. I know the delay is in the lights and not the smart plugs, as I can hear when the relays in the smart plugs switch. This is not a huge deal, but it's a minor annoyance that's worth noting. Of course, the lights do turn off immediately when power is turned off.- The AC/DC transformers on these are quite large. The transformer is built into the plug, so the only way to mount the transformers up underneath the cabinet out of sight is to use extension cords. This is especially true when you also have a smart plug between the transformer and the wall outlet. It was really a lot of bulk sticking out of the wall and looked kind of unsightly until I got some short 90-degree plug extension cords that allowed me to mount the transformers and smart plugs up underneath the cabinets where they are out-of-sight.- The light strips do get pretty warm. Of course, I'd expect that with incandescent bulbs, but it seems surprisingly warm for LEDs. This hasn't been a problem at all for me, but you'd want to make sure that these are placed where kids or pets wouldn't touch them and get burned.Overall, despite a few minor annoyances, these paired with the smart plugs have worked great for my use case for getting under-cabinet lighting that's easy to control without expensive tearing up of walls and installation of new AC power lines by an electrician. My kitchen is much brighter than it was before, which makes the kitchen feel nicer overall, but also makes food preparation easier by lighting up the counters well.