Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 5100-0001 No.00 H.S.S. Keyway Broach Precision Set, in a fitted aluminum case
Accusize 5100-0001 No.00 H.S.S. Keyway Broach Precision Set, in a fitted aluminum case
All broach sets are furnished in handsome varnished boxes and come complete with precision roaches, slotted bushings, and necessary shims.
- The most common keyway combinations for small keyways and bores.
- 3 broaches by 5 bushings equal 15 combinations.
- Keyway size 1/16"-A, 3/32"-A, & 1/8"-A
- Bushing Dia. Bore Size 1/4", 5/16", 3/8", 7/16", 1/2"
- In a Fitted wooden box
Technical data:
- Manufactured from H.S.S.
- Ground from solid.
- Straight teeth on one edge of the broach.
- Made to cut either inch or millimetre size keyways.
- Bright finish.
Features:
- Hardened and ground bars with cutting teeth on one side.
- Sized and proportioned to afford a good cutting range and ample rigidity.
Application and Specification
Applications:
- Specialty tools designed for cutting keyways in machined holes.
- Typically used manually with an arbour press to produce the keyways.
- Well suited for use in a variety of ferrous and non-ferrous materials.
Specifications:
- Specification of keyway broaches:
- 1/16"-A, Tolerances Dec.Equiv.: 0.0625-0.0635, Dimensions: 1/8"x5", Shims Required: 0, Length of cut: 13/64"-1-1/8", SKU: 5000-0002
- 3/32"-A, Tolerances Dec.Equiv.: 0.0938-0.0948, Dimensions: 1/8"x5", Shims Required: 0, Length of cut: 13/64"-1-1/8", SKU: 5000-0004
- 1/8"-A, Tolerances Dec.Equiv.: 0.1252-0.1262, Dimensions: 1/8"x5", Shims Required: 1, Length of cut: 13/64"-1-1/8", SKU: 5000-0006
- Bushing Diameters Bore Sizes- Collared:
- 1/4",
- 5/16",
- 3/8",
- 7/16",
- 1/2"
Specification of keyway broaches
1/16"-A
- Tolerances Dec.Equiv.: 0.0625-0.0635,
- Dimensions: 1/8"x5",
- Shims Required: 0,
- Length of cut: 13/64"-1-1/8",
- SKU: 5000-0002
3/32"-A
- Tolerances Dec.Equiv.: 0.0938-0.0948,
- Dimensions: 1/8"x5",
- Shims Required: 0,
- Length of cut: 13/64"-1-1/8",
- SKU: 5000-0004
1/8"-A
- Tolerances Dec.Equiv.: 0.1252-0.1262,
- Dimensions: 1/8"x5",
- Shims Required: 1,
- Length of cut: 13/64"-1-1/8",
- SKU: 5000-0006
Bushing Diameters Bore Sizes- Collared:
- 1/4",
- 5/16",
- 3/8",
- 7/16",
- 1/2"
Honest Buyer
Reviewed in the United States on February 3, 2024
This is a very reasonably priced set of three small Keyway broaches. They came with several bushings and one shim. I think they should include a second shim in order to get the Keyway cut to the proper depth, but I was able to make one myself from some scrap material I had on hand.
gp
Reviewed in Canada on December 12, 2024
beau kit
DOMINIC DUCHESNE
Reviewed in Canada on April 17, 2024
pour mon atelier d'usinage
Customer
Reviewed in the United States on August 25, 2022
Got it to cut some keyways in some gears and it work great
Brian
Reviewed in Canada on December 16, 2022
Broaching 4140 Ht at 3/32. Worked great.
KJT
Reviewed in the United States on March 9, 2021
Used this to broach a 1/8" keyway in a gear. worked great, broach was sharp, had zero problems! Nice little set, I'd recomend. I used a harbor freight 12 ton press to do the job.
GW
Reviewed in Canada on December 19, 2021
Haven't used them yet, but look well made.
Coalwasking
Reviewed in the United States on February 8, 2020
Nice quality. Worked well.
Bill in Florida
Reviewed in the United States on March 29, 2019
I've cut a couple of key ways with these and they turned out great. Agree that they could use a second shim.
Bach911
Reviewed in the United States on May 1, 2018
I was able to broach steel with a two ton press. I needed to make an additional spacer. One spacer is not enough.
Tad
Reviewed in the United States on December 26, 2018
I build steam engines from castings, and have never been satisfied with the standard "grub screw on a flat" means of attaching the flywheel, but I thought proper broaches only came in large sizes.This broach set is made for tiny work--the broaches fit in the palm of my hand. I didn't need an arbor press either; I put the flywheel across two 1-2-3 blocks in my mill vise and used the quill to press the baby broach through. Don't forget to go to Grainger and get some matching baby key stock.Top notch for model machine shop work.
J. B. Taylor
Reviewed in the United States on December 18, 2018
Nice set of broaches. Nice finish and size is right
Traction Engine
Reviewed in Canada on November 16, 2018
I'm very pleasantly surprised at the value. I was concerned that they wouldn't cut steel but they have no problem with it. Because I wasn't careful with alignment during one cut, I broke the 1/8 broach in two - not the fault of the product. It's still usable in two pieces and keeps cutting. A great product.
Recommended Products
$37.99
$ 19 .99 $19.99