Shopping Cart

Your cart is empty.

Your cart is empty.

AC Flush Kit, Car Air Conditioner System Clean Canister Flushing Gun Tool Set, for Auto HVAC Pipe Line Cleaning, with 220PSI Gauge, Air Fittings and Hose

5.0 (9) Write Review
Free shipping on orders over $29.99

$24.99

$ 12 .99 $12.99

In Stock
  • Superior AC System Flush Tool: This 1 liter empty flush canister is made of high quality stainless steel, sturdy and anti-corrosion. The tank body adopts integrated molding technology, which is very strong and pressure-resistant. The brass integrated cover is equipped with 1/4 inch American and European air plug with ball valve, brass outlet for connecting hose, pressure gauge(0-220 pounds per square inch) and hook
  • Excellent Hose and Spray Gun: Rubber nylon resin material durable hose, 3-1/2 feet long, features with anti-corrosion, low fluid resistance and high bearing pressure, max working pressure is 600 pounds per square inch and burst pressure is upto 3000 pounds per square inch. Spray gun uses aluminium material with brass nozzle and rubber tappered tip. The fittings which will touch the flush solvent, all adopt brass and aluminum material, ensure the AC flushing kit can be used repeatedly
  • Wide Usage of JIFETOR Air Conditioner Flush Cylinder: When replace or retrofit AC system, or there is odorous smell from air conditioning, you can use this AC cleaning tool kit to deep flush each component individually including hose, condenser and evaporator. Do not flush the compressor, expansion valve, orifice tube, filter drier and accumulator. JIFETOR flush bottle set also can be used to clean fuel pipe, and any other washable line such as household refrigerator air conditioner line
  • How It Works: The air conditioning flush can, use shop air to pressurize and spray specific AC flush solvent, to flush old oil, refrigerant contaminants and residue, moisture, acid and dirt. The rubber tapered tip can be sealed against pipe opening and prevent backspray of solution. If the pipe opening is smaller than the rubber tapered tip, you can try to take the tapered tip off and insert the brass spray nozzle into the pipe
  • Operation Steps: When replace or retrofit AC system, you need recover the old refrigerant, disassemble AC system components, fill the flush canister with lightweight solution, assemble flush kit components and tighten, insert the tapered tip into line then flush and blow, assemble AC system component, vacuum leak check and recharge. Pay attention to pressure gauge index when using, please do not exceed 150 pounds per square inch
  • Packing List: JIFETOR complete AC flush kit includes 1 empty cylinder, 1 3-1/2 feet hose with flush gun, and some spare fittings and o-rings. AC flush solution, air compressor and air hose are not included. The instructions in the package introduce the usage and precautions of the product in detail. There is a detailed instructions pasted on the bottle, please read it carefully before operation, and always refer to equipment manufacturer's operation instruction


Product Description

AC Flush Kit

COMPLETE AIR CONDITIONER FLUSH TOOL SET

  • 1x Empty Stainless Steel Canister with 1/4" NPT American Air Plug and 1/4" SAE Hose Adapter
  • 1x 3.5FT Hose with 1/4" Female Fittings and Flush Gun with Rubber Tapered Tip
  • 1x Spare Rubber Tapered Tip
  • 1x Spare 1/4" NPT European Air Plug Fittings
  • 1x Spare 1/4" SAE Brass Hose Adapter
  • 2x Spare Rubber O-rings in Cylinder Opening
  • 2x Spare Plastic Gasket in Hose Fittings

Something you need but not included SPECIFIC AC flush solution Air compressor Air compressor hose

STAINLESS STEEL CYLINDER

STAINLESS STEEL CYLINDER

32oz one-piece molding stainless steel canister, equipped with metal 1/4" NPT American air plug, built-in ball valve, brass bottle cap with rubber o-ring, metal hang hook, siphon tube, brass 1/4" SAE hose adapter, 220PSI pressure gauge. The flush can uses shop air to pressurize and spray specific AC flush solvent.

3.5FT HOSE

3.5FT HOSE

Rubber nylon resin material durable hose, 3.5FT long, max working pressure is 600PSI and burst pressure is upto 3000PSI, each side is loaded with 1/4" female brass fittings for easy connection. Special small holes design on resin layer double ensure explosion-proof features of hose.

ALUMINUM FLUSH GUN

ALUMINUM FLUSH GUN

Ergonomically designed flush gun body is made of aluminum, equipped with brass 1/4" SAE hose adapter, brass spray nozzle, rubber tapered tip. The rubber tapered tip can be sealed against pipe opening and prevent backspray of solution. If the pipe opening is smaller than the rubber tapered tip, you can try to take the tapered tip off and insert the brass spray nozzle into the pipe.

SPARE PARTS

SPARE PARTS

1 spare 1/4" NPT European air plug fittings for more choices. There are also some other spare parts in the AC flushing canister kit, in case you lose or damage these small part.

WIDE USAGE OF JIFETOR AIR CONDITIONING CLEAN TOOL SET

flush tool

WHAT are flushed away?

Old oil, refrigerant contaminants and residue, moisture, acid, dirt and something else. It depends on the solvent you're using.

WHEN to use?

When you replace or retrofit AC system, or there is odorous smell from air conditioning, or clean regularly refer to manufacturer's recommendation and the AC system situation.

WHERE to flush?

You can use this AC flush tool kit to deep flush each component individually including hose, condenser and evaporator. Do not flush the compressor, expansion valve, orifice tube, filter drier and accumulator. JIFETOR AC cleaning tool set also can be used to clean fuel pipe, and any other washable line such as household refrigerator air conditioner line.

NOTE

1. Please wear gloves and goggles when use.

2. This AC flush kit should be used by professional or under the guidance of a professional.

3. Always refer to equipment manufacturer's operation instruction.

4. Please wash the cylinder before first use, ensure there is no debris inside. After use, please clean up the residual solvent from the flush tool kit, dry and properly preserve.

5. The hose and o-ring are made of rubber, please choose SPECIFIC AC flush solution and note your flush solution will not corrode rubber.

6. Tighten all the components, insert the rubber tapered tip into pipe opening and hold it, then flush.

7. Don't exceed 150PSI.

8. Disconnect air supply and release the air in the bottle before add new solution.

9. Do not leave a pressurized flushing bottle unattended 10. Dispose of flush solvent, oil and debris in accordance with local, state and federal laws.


Customer
Reviewed in the United States on July 30, 2024
Worked great on the AC evaporator. Plan to use it to flush the water heater tank on my RV, as well.
Taylor Griffin
Reviewed in the United States on January 26, 2024
This is the perfect tool for what we need. Doubled my efficiency on jobs involving flushing.
Gilles
Reviewed in the United States on April 6, 2024
Do it
Charlie V
Reviewed in the United States on May 19, 2023
Why do people pay hundreds of dollars at mechanic shops for things they can do for dozens of dollars themselves? I don’t know and you don’t either since you are reading this.It works fine. Dispensed AC cleaner perfectly.
Craig
Reviewed in the United States on February 13, 2023
Cheaper than similar products. good quality and includes some extra fittings.
Ness
Reviewed in the United States on November 1, 2023
Great value but the trigger leaked bad. Had to buy another one that didn’t leak fluid everywhere. Yes it was tight.
Dave Johnson
Reviewed in the United States on April 7, 2023
This product is great.
versus_06
Reviewed in Mexico on December 9, 2021
El equioo hace muy bien su trabajo y el material es lo prometido muy recomendable
michael
Reviewed in the United States on December 25, 2021
I used this canister to flush old merc190e evaporator, condenser,and all hoses and it works very well,, using first a solvent , then i used 91% alcohol, then i vac system and re gassed air con michael s.africa