Your cart is empty.
Your cart is empty.Product Description
A SMALL TOOL TO SOLVE THE CAR PROBLEMS THAT TROUBLES YOU SO MUCH!
[Airbag Bypass Resistor Attributes]
▨ Colors：Black
▨ Dimensions：1.92x0.76x0.42 inch
▨ Voltage：12V
▨ Weight：0.74 oz
▨ Material：ABS, gold-plated brass
▨ Packaging：4x Airbag simulator tester
EVERY DETAIL IS WORTH EXPLORING
[Airbag Bypass Resistor Functions]
▨ Feature：Sensitive, safe, plug and play, compact, lightweight
▨ Function：Used to detect car airbag systems
MORE POWERFUL THAN YOU CAN IMAGINE!
▨ If your car ECU detects fault codes for equipment such as airbags, steering wheels, and seat belts, simply use our airbag simulator tester to accurately determine the location of the fault and avoid expensive equipment replacement costs!
STANDARD SPECIFICATIONS ARE DESIGNED FOR A WIDE RANGE OF APPLICATIONS!
▨ The voltage of this airbag bypass resistor is 12V, which is suitable for the SRS system of most cars, SUVs, trucks, and pickup trucks on the market.
Jason
Reviewed in the United States on February 22, 2025
On a 2013 Volvo XC60, the manufacturer installed resistors on the seat belt pre-tensioners they discontinued on certain models, these allow the system to think the pre-tensioners are still installed. When repairing an airbag deployment these kept popping up as faulty. Installed resistors, all faults clear!
Miguel perez
Reviewed in the United States on August 5, 2024
Muy bueno
Dan Narowitz
Reviewed in the United States on July 25, 2024
worked in for airbags in my 2016 highlander. I see someone else got a reading of 2.1 ohm which it what Toyota calls for but mine measured 2.5 ohm and still worked just fine.
Maria
Reviewed in the United States on March 26, 2024
did not work for me 2006 f250 may work for others
Paul Myers
Reviewed in the United States on March 11, 2024
I was able to test the seat air bags to find that they were definitely bad.Might just leave them in. LoL
Trevor Abell
Reviewed in the United States on April 2, 2024
Pretty good tool! I used this to test the airbag system on a 2000 ford ranger after replacing the SRS (RCM). The only reason I gave it 4 stars was the pins are right next to each other and I had to bend the pins and stick it into the back of the airbag connector. It would be nice to be able to rearrange the pins for the different vehicle connectors.
Frank
Reviewed in the United States on December 13, 2023
This helped me figure out what was causing the airbag fault light. I used a diagnostic tool to find out which one was throwing the code. Once I found out which one, I disconnected the connector and plugged in the resistor. I was able to clear the code, but after driving it for a bit, the light/code came back. That told me my seatbelt pretensioner was fine. It turned out to be a loose connector wire. I replaced the pigtail and connector, and I was able to clear the code- hopefully for good. The resistor is easy to plug in and made it much easier to isolate the issue.
Thomas J. Smith
Reviewed in the United States on October 10, 2023
Tried this in a Toyota seat occupancy circuit. It did nothing.With nothing to lose I opened it up to find nothing more than a 2.2 Ohm resistor.
Recommended Products